Contemporary-control-systems CANPCI Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Contemporary-control-systems CANPCI. Contemporary Control Systems CANPCI User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
CANPCI Series
C
O
N
TR LSO
®
CONTEMPORARY
A Line of CANbus
®
Network Interface Modules for PCI Bus Computers


The CANPCI Series of Controller Area Network (CAN) adapters provide
eldbus access to PCI bus computers. CAN is the Data Link layer technology
used by CANopen, DeviceNet and Smart Distributed System. The CANPCI
supports 8-bit transfers and takes advantage of the high-speed PCI bus. The
CANPCI-DN implements the DeviceNet physical layer. The CANPCI-CO
provides a CANopen physical layer.
The CANPCI features the Philips SJA1000 CAN stand-alone controller chip
which is used widely in both the automotive and industrial environments.
Besides being backward compatible with the older 82C200, the SJA1000 has
more features than its predecessor. The 82C200 is restricted to BasicCAN
(11-bit identiers) whereas the SJA1000 operates in either BasicCAN mode or
the newer PeliCAN mode which supports the CAN 2.0B specication (29-bit
identiers). The SJA1000 maintains extended frame passivity while in the
BasicCAN mode.
The SJA1000 operates from a 16 MHz clock and features a larger receive
buffer and better acceptance-ltering — including the ability to extend the
acceptance mask to the data eld. It has the capability to operate at data rates
as great as 1 Mbps.
Optically-isolated transceivers provide reverse voltage and short-circuit
protection for either the CANPCI-DN (implementing the DeviceNet 5- position
open style connector) or the CANPCI-CO (implementing the CANopen DB-9
connector as dened by CAN in Automation).
The PeliCAN mode includes:
Error counters with read/write access
Programmable error warning limit
Last error code register
Error interrupt for each CAN bus error
Arbitration lost interrupt with detailed bit position
Single-shot transmission (no re-transmission)
Listen only mode (no acknowledge, no active error ags)
Hot plugging support (software driven bit rate detection)
Acceptance lter extension (4-byte code, 4-byte mask)
Reception of ‘own’ messages (self reception request)
Vista de pagina 0
1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - CANPCI Series

CANPCI SeriesCONTR LSO®CONTEMPORARYA Line of CANbus® Network Interface Modules for PCI Bus ComputersThe CANPCI Series of

Pagina 2

Contemporary Controls, ARC Control, ARC DETECT, BASautomation, EXTEND-A-BUS, RapidRing, and CTRLink are trademarks or registere

Pagina 3 - 

Power RequirementsEnvironmentalOperating temperature: 0°C to +60°CStorage temperature: –40°C to +85°CData Rates50 kbps,

Pagina 4 - Support Files

HARDWARE: The CANPCI can be installed in any PCI computer bus. With power removed from the computer, remove its cover. Take

Pagina 5 - CANbus Transceiver Power

CANbus Transceiver PowerThe  takes it transceiver power from the host computer, but an onboard DC-DC converter provides

Pagina 6

Contemporary Controls (CC) warrants this product to the original purchaser for two years from the product shipping date. Product

Pagina 7

[This page was left blank deliberately.]

Pagina 8

[This page was left blank deliberately.]

Comentarios a estos manuales

Sin comentarios