Contemporary-control-systems BASremote User Manual (firmware 3.1.x) Manual de usuario descargar pdf (Pagina 38)

TD040300-0MF

6.3 Channel Configuring

To configure a channel, access the Web Server Page, click on the icon for the channel

of interest and make adjustments in the new screen that appears. Your selected channel is

confirmed by the large number on the left side of the new screen. As Figure 24 shows,

clicking on the Save button is confirmed by the button briefly changing from light blue to dark

blue. If you attempt to set an illegal value, the button will not change colour.

6.3.1 Analog Voltage Input Configuring

You can define any channel 1–6 as “INPUT: 0–10V Analog” or “INPUT: 0–5V Analog” (As an

example, Figure 24 uses Channel 1 and 0–10V). Such a channel can accept an input voltage in

the range of 0–10 volts or 0–5 volts. The channel BACnet type will be Analog Input. On this

screen, you can adjust these parameters:

BACnet Unit Group The Electrical default can be set to any option in the list.

Channel Name You can rename the channel using no more than 63 characters.

This will be the object name for this channel (followed by the

channel number). For example, “Analog Input-1”.

BACnet Unit Group The Electrical default can be set to any option in the list.

BACnet Unit Value The VOLTS default can be set to any option in the list. The available

options depend on the BACnet Unit Group you specify.

BACnet COV Increment Once the channel value changes by this amount (up or down), a

COV message is sent to subscribers.

BACnet Description You can enter any string using no more than 63 characters.

ACTUAL HIGH This specifies the highest value within the range.

ACTUAL LOW This specifies the lowest value within the range.

SCALED HIGH You can set a physical value corresponding to the high value.

SCALED LOW You can set a physical value corresponding to the low value.

Figure 24 — Analog Input Configuration

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

Sin comentarios

Contemporary-control-systems BASremote User Manual (firmware 3.1.x) Manual de usuario Pagina 38