Contemporary-control-systems Compact Managed Switches Software Manual for Web B Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 83
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
TD020851-0MG
61
oid = "1.3.6.1.2.1.2.2.1.9.ifIndex"
ifLastChange: The value of sysUpTime at the time the interface entered its current
operational state
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.10.ifIndex"
ifInOctets: the total number of octets received on the interface, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.11.ifIndex"
ifInUcastPkts: The number of unicast packets received, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.12.ifIndex"
ifInNUcastPkts: The number of non-unicast packets received, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.13.ifIndex"
ifInDiscards: The number of inbound packets discarded with no error detected, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.14.ifIndex"
ifInErrors: The number of inbound packets with errors, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.15.ifIndex"
ifInUnknowProtos: The number of packets received via the interface which were
discarded because of unknown or unsupported protocol. Returns 0.
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.16.ifIndex"
ifOutOctets: The total number of packets transmitted, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.17.ifIndex"
ifOutUcastPkts: The number of packets transmitted to a unicast address, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.18.ifIndex"
ifOutNUcastPkts: The number of packets transmitted to a non-unicast address, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.19.ifIndex"
ifOutDiscards: The number of outbound packets discarded with no error detected, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.20.ifIndex"
ifOutErrors: The number of outbound packets with errors, 32 bit
Access: read-only
oid = "1.3.6.1.2.1.2.2.1.22.ifIndex"
ifSpecific: A reference to MIB definition specific to the particular media being used to
realize the interface
Access: read-only
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 82 83

Comentarios a estos manuales

Sin comentarios