Contemporary-control-systems Compact Managed Switches Software Manual for Web B Manual de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 83
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
TD020851-0MG
74
5.2.4 Evolution of the Interface Group of MIB-II From RFC 1573
MIBs for generic objects for network Interface sub-layers ‘ifMIB’ 1.3.6.1.2.1.31
MIB Objects ‘ifMIBObjects’ 1.3.6.1.2.1.31.1
Extension to the Interface Table ‘ifXTable’ 1.3.6.1.2.1.31.1.1
oid = “1.3.6.1.2.1.31.1.1.1.1.ifIndex”
ifName: The textual name of the interface
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.2.ifIndex”
ifInMulticastPkts: The number of multicast packets received, 32 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.3.ifIndex”
ifInBroadcastPkts: The number of broadcast packets received, 32 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.4.ifIndex”
ifOutMulticastPkts: The number of multicast packets transmitted, 32 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.5.ifIndex”
ifOutBroadcastPkts: The number of broadcast packets transmitted, 32 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.6.ifIndex”
ifHCInOctets: The total number of octets received on the interface, 64 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.10.ifIndex”
ifHCOutOctets: The total number of octets transmitted by the interface, 64 bit
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.14.ifIndex”
ifLinkUpDownTrapEnable: Indicates whether or not linkup/linkDown traps should be
generated for this interface
1 = enabled
2 = disabled
Access: read-write
oid = “1.3.6.1.2.1.31.1.1.1.15.ifIndex”
ifHighSpeed: An estimate of the interface current bandwidth in units of 1M bits/sec
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.16.ifIndex”
ifPromiscuousMode: Indicates whether this interface only accepts packets/frames
addressed to this station (false) or accepts all packets/frames transmitted on the media
(true). The value does not affect broadcast and multicast packets/frames.
1 = true
2 = false
Access: read-only
oid = “1.3.6.1.2.1.31.1.1.1.17.ifIndex”
ifConnectorPresent: Indicates whether the interface has a physical connector
1 = true
2 = false
Access: read-only
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 82 83

Comentarios a estos manuales

Sin comentarios