Contemporary-control-systems BAScontrol20 Installation Guide Manual de usuario descargar pdf (Pagina 2)

TD100700-0IA

SPECIFICATIONS

Universal Inputs (Points UI1 – UI8) (web page configurable)

Analog inputs: 0–10 VDC or 0–20 mA (with external resistor)

(Input impedance 1 MΩ on voltage)

Temperature input: Type II 10 kΩ thermistors: –10º to +190 ºF (–23.3º to +87.8ºC)

Type III 10 kΩ thermistors: –15º to +200 ºF (–26.1º to +93.3ºC)

Binary input: Excitation current 0.5 mA. Open circuit voltage 12 VDC.

Sensing threshold 3 VDC (low) and 7 VDC (high).

Pulse input : (Points UI1–UI4) Adjustable high and low thresholds.

0–10 VDC for active output devices.

0–12 VDC for passive devices (configured for internal pull-up resistor)

40 Hz maximum input frequency with 50% duty cycle.

Binary Inputs (Points BI1 – BI4)

Binary input: Excitation current 1.2 mA. Open circuit voltage 12 VDC.

Sensing threshold 3 VDC (low) and 7 VDC (high).

Response time 20 ms.

Analog Outputs (Points AO1 – AO4)

Analog output: 0–10 VDC. 12-bit resolution. 4 mA maximum.

Binary Outputs (Points BO1 – BO4) (Class 2 circuits only)

Model BASC-20R: Normally open relay contacts. 30 VAC/VDC 2 A.

Model BASC-20T: Isolated triac. 30 VAC 0.5 A.

Regulatory Compliance

CE Mark, CFR 47, Part 15 Class A, RoHS

UL 508, C22.2 No. 142-M1987

Functional Ethernet

Compliance: IEEE 802.3

Protocols supported: BACnet/IP, SOX

Data rate: 10 Mbps, 100 Mbps

Physical layer: 10BASE-T, 100BASE-TX

Cable length: 100 m (max)

Port connector: Shielded RJ-45

LED: Green = Link established

Flash = Link activity

1 2 3 4 5 6 7 ... 15 16

Sin comentarios

Contemporary-control-systems BAScontrol20 Installation Guide Manual de usuario Pagina 2