
TD020850-0MG
Egress Mirroring Rules pertain to data transmitted by the ports being mirrored. The
example screen of Figure 10 shows that Port 4 has been designated as the only
Source Port. Since the Divider value is 10, only one out of every 10 messages
transmitted by Port 4 will be copied to the Mirror Port. The example also shows that,
because the MAC Address setting is All, the source/destination address information in
the copied messages will be ignored. And because the MAC Address in Figure 10 is
set to All, the Source/Destination Addr line which appears in Figure 9 is not displayed.
Figure 10 — Configure Port Mirroring Egress Rules
For 16- and 24-port switches, Figure 9 and Figure 10 would display the applicable
number of spaces within the square brackets to the right of Source Ports.
Comentarios a estos manuales