Contemporary-control-systems Compact Managed Switches Software Manual for Conso Manual de usuario descargar pdf (Pagina 26)

TD020850-0MG

4.3.6.2 Configure Static Forwarding Table

The forwarding (address) table can hold not only learned addresses, but also up to 30

static unicast addresses. (The sample screen of Figure 18 displays three addresses set

on an 8-port switch.) Static addresses perform as if learned, but are not subject to the

aging process. One of four levels of priority can also be applied to messages containing

the entered MAC address of the destination.

The Action field can be toggled between Add and Delete. The MAC Address field

requires a valid input from the user; it is not case sensitive. To identify the port being

defined, enter a value in Egress Port field. The default Priority value is Normal — use

the space bar to select a Low, Medium or High level. When the cursor is positioned in

the Apply field, pressing the “Enter” key will complete the update.

To modify a defined address, first delete it — then redefine it with new values.

Figure 18 — Configure Static Forwarding Table

NOTE: For an address to be accepted as a valid unicast address, its second digit must be even. If

the second digit is odd, an error is reported in the Help Area.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

Sin comentarios

Contemporary-control-systems Compact Managed Switches Software Manual for Conso Manual de usuario Pagina 26