Contemporary-control-systems Compact Managed Switches Software Manual for Conso Manual de usuario Pagina 77

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 76
TD020850-0MG
77
5.1.5 Private Managed Objects
MIBs for Contemporary Controls 1.3.6.1.4.1.17384
Switch Family 1.3.6.1.4.1.17384.1
Switch Series 1.3.6.1.4.1.17384.1.1
oid = “1.3.6.1.4.1.17384.1.1.1.0
temperature: indicates the internal temperature of the switch in degrees Celsius.
Type: string
Access: read-only
5.1.5.1 Relay Group 1.3.6.1.4.1.17384.1.1.2
oid = "1.3.6.1.4.1.17384.1.1.2.1.0"
switchFaultStatus: the fault status of this switch.
Type: integer
1 = fault has occurred
2 = no fault has occurred
Access: read-only
5.1.5.1.1 Fault Table ‘faultTable’ 1.3.6.1.4.1.17384.1.1.2.2
oid = "1.3.6.1.4.1.17384.1.1.2.2.1.ifIndex"
portMonitoringFaultStatus: fault status for each port.
Type: integer
1 = fault has occurred
2 = no fault has occurred
Access: read-only
5.1.5.2 RapidRing Group 1.3.6.1.4.1.17384.1.1.3
oid = “1.3.6.1.4.1.17384.1.1.3.1.0”
ringEnableStatus: the RapidRing is enabled or disabled
Type: integer
1 = RapidRing is enabled
2 = RapidRing is disabled
oid = “1.3.6.1.4.1.17384.1.1.3.2.0”
switchMode: the switch is a Master or a Slave
Type: integer
1 = Master
2 = Slave
oid = “1.3.6.1.4.1.17384.1.1.3.3.0”
ringID: the group number of the RapidRing
Type: integer
1 = group number 1
2 = group number 2
oid = “1.3.6.1.4.1.17384.1.1.3.4.0”
networkStatus: the network topology
Type: integer
1 = Ring Not Available (because RapidRing is not enabled)
2 = Ring Complete
3 = Ring Incomplete
Vista de pagina 76
1 2 ... 72 73 74 75 76 77 78 79 80

Comentarios a estos manuales

Sin comentarios